FARMEC 14 Tonne Farm Tip Trailer
The Fieldmaster range of trailers is purpose-built for dependable, all-purpose farm work, combining strength, practicality, and impressive adaptability.
Farmec, Farm Tip Trailers
Specifications
| Brand: | Farmec |
| Body Type: | Flat floor with hinged removeable sides |
| Capacity (kg): | 14 tonnes |
| Capacity (m3): | 6.5m3 level loaded at 2,000kgs/m3 |
| Body Length (mm): | 5,200 |
| Body Width (mm): | 2,530 |
| Side Depth (mm): | 525 |
| Loading Height (mm): | 1,300 depending on wheels |
| Ram Type: | Via 14 tonne hydraulic multistage cylinder requiring 25 litres of oil to lift to 60 degrees and terminating at 1/2 inch QRC - 4061 |
| Tipping: | 1st stage 38.4 tonnes |
| Tipping: | 2nd stage 29.7 tonnes |
| Tipping: | 3rd stage 22.4 tonnes |
| Tipping: | 4th stage 16.1 tonnes |
| Tipping: | 5th stage 10.9 tonnes |
| Tipping: | 6th stage 6.5 tonnes |
| Drawbar (mm): | 250 x 100 x 9 Single beam drawbar |
| DB Support: | Fitted with 80mm jack stand |
| Wheels STD: | 500 / 45R x 22.5 (16,200kgs at 40km/hr) |
| Axle Capacity: | Tandem 90mm / 8 stud braked (23,000kgs at 40km/hr) |
| Brakes: | Fitted as standard with 4 x actuators to tractor brake pedal as standard |
| Chassis (mm): | 250 x 100 x 9 fully welded |
| Top Chassis (mm): | 200 x 100 x 6 RHS |
| Headboard: | Removeable with corner sockets. Fitted with RHS top shock rail and extension grab rail for aesthetics |
| Sides: | Detachable hinging sides that bolt in rigid, allowing easy access to side loading. RHS top shock rail to prevent damage. There are 2 removable panels per side held together with a centre deck staunchen |
| Tailgate: | Detachable tailgate with RHS top shock rail, includes independent corner posts to allow rear door to be removed, yet sides remain fixed. Door hinge is 100mm higher and 100mm forward of central balance point |
| Door Locking: | Hydraulic trip back door operated from a double acting remote in the tractor cab |
| Rope Rails: | Fitted with 1 inch bore pipe attached every third floor member |
| Deck Thickness: | 4 mm Corten 350G crossed braced every 350mm |
| Side Thickness: | Pressed Corten 3mm 350 grade with upright bracing |
| Tow Eye: | Swivel 50mm eye as standard |
| Finish: | Blasted, zinc base primer, 2 x gloss coats |
| Colour: | Standard Farmec yellow with rims and tailgate silver |
| Features: | Fast tipping, Heavy duty, Diverse, Hydraulic auto opening door with spreading chains |
Description
The Fieldmaster range of trailers is purpose-built for dependable, all-purpose farm work, combining strength, practicality, and impressive adaptability.A fast-tipping body with a 60° tipping angle ensures even heavy or sticky loads empty with ease, while the full RHS chassis and single drawbar member provide excellent strength and allow for a generous turning circle. The four-piece hinged sides are easily removed, and the tailgate lifts cleanly off its hinges, enabling the trailer to be operated without the rear door when required. Corner sockets in the deck securely locate the tailgate posts, keeping the sides stable and adding to the trailer’s versatility across a wide variety of farming operations.
A standout feature is the removable headboard, which can be lifted out of its sockets to allow hay posts or bolsters to be fitted at all four corners, effectively converting the trailer into a capable flatbed for pole or long-load transport. The hydraulic tail door opens and closes conveniently from the tractor cab, while spreading chains ensure material is dispensed consistently and at the correct rate. Wheel options include the optional 445/65 x 22.5 (1174mm Ø) road wheels, or the standard 500/60R x 22.5 (1176mm Ø) flotation tyres, as well as the super-wide 560/45R (1074mm Ø), which also helps keep the deck height low.
