FARMEC 10 Tonne Farm Tip Trailer
The Farmaster range of trailers is purpose-built for reliable, everyday farm use, offering a strong, adaptable design that suits a wide variety of tasks.
Farmec, Farm Tip Trailers
Specifications
| Brand: | Farmec |
| Body Type: | Flat floor with hinged removeable sides |
| Capacity (kg): | 10 tonnes |
| Capacity (m3): | 5.5m3 level loaded at 2,000kgs/m3 |
| Body Length (mm): | 4,400 as standard or 4.8m on the XL |
| Body Width (mm): | 2,440 |
| Side Depth (mm): | 525 |
| Loading Height (mm): | 1,120 depending on wheels |
| Ram Type: | Via under body hydraulic multi-stage cylinder. Requires 16 litres of oil to lift to 60 degrees, terminating at 1/2 inch QRC giving the following lift at 160 bar |
| Tipping: | 1st stage 22.4 tonnes |
| Tipping: | 2nd stage 16.1 tonnes |
| Tipping: | 3rd stage 11.7 tonnes |
| Tipping: | 4th stage 8.1 tonnes |
| Tipping: | 5th stage 5.2 tonnes |
| Drawbar (mm): | Rigid drawbar 200 x 100 x 9 |
| DB Support: | Fitted with 80mm jack stand |
| Wheels STD: | 400 / 60R x 15.5 - 14 ply floatation wheels |
| Axle Capacity: | Tandem 70mm / 6 stud brakeless (14,800kgs at 40km/hr) |
| Chassis (mm): | 200 x 100 x 6 fully welded chassis |
| Top Chassis (mm): | 152 x 75 x 6 RHS |
| Headboard: | Removeable with corner sockets. Fitted with RHS top shock rail and extension grab rail for aesthetics |
| Sides: | Detachable hinging sides that bolt in rigid, allowing easy access to side loading. RHS top shock rail to prevent damage. There are 2 removable panels per side held together with a centre deck staunchen |
| Tailgate: | Detachable tailgate with RHS top shock rail, includes independent corner posts to allow rear door to be removed, yet sides remain fixed. Door hinge is 100mm higher and 100mm forward of central balance point |
| Door Locking: | Mechanical opening and locking controlled from tip angle |
| Rope Rails: | Fitted with 1 inch bore pipe attached every third floor member |
| Deck Thickness: | 4 mm Corten 350G crossed braced every 350mm |
| Side Thickness: | Pressed Corten 3mm 350 grade with upright bracing |
| Tow Eye: | Swivel 43mm eye as standard |
| Finish: | Blasted, zinc base primer, 2 x gloss coats |
| Colour: | Standard Farmec yellow with rims and tailgate silver |
| Features: | Fast tipping, Heavy duty, Diverse, Mechanical auto opening door with spreading chains, Optional hydraulic door |
Description
The Farmaster range of trailers is purpose-built for reliable, everyday farm use, offering a strong, adaptable design that suits a wide variety of tasks.The fast-acting tipping body achieves an impressive 60° angle, ensuring even stubborn or sticky loads discharge smoothly. A robust full RHS chassis paired with a single drawbar member provides exceptional strength and allows for a generous turning circle, while the four-piece hinged sides are easily removed. The tailgate lifts cleanly off its hinges so the trailer can be operated without the rear door, with corner sockets on the deck securely locating the tailgate posts to keep the sides stable. This thoughtful layout makes the Farmaster an extremely versatile trailer suitable for many different farming applications. Many units are fitted with a 1.2-metre extension that locks neatly into the top deck members, increasing the floor length to 6 metres—ideal for carrying up to fourteen round bales.
It also features a removable headboard, which can be lifted from its sockets to allow bolsters to be installed at all four corners, transforming the trailer into a practical flatbed for transporting poles. The mechanical auto-opening tail door activates as the trailer tips, though a hydraulic version is available for those who prefer it, and spreading chains ensure material is distributed at a controlled rate. The standard wheel configuration is 500/50 x 17 (945 mm diameter), providing solid performance across varied farm terrain.
